PF Firewall A10 Dual Core rack Gen2

PFS2600
€549.00

Be the first to review this product

* Required Fields

€549.00
The PF Firewall A10 Dual Core rack edition is an out-off-the-box firewall experience.The PF Firewall Solution is named after Packet Filter (PF) and based upon an unmodified fully featured version of pfSense® CE.
Delivering 600Mbit/s routing and firewalling shows the power of this system.

Environmental friendly as this embedded, quiet appliance consumes approximately 15Watt in typical operating conditions.

Note: This appliance is not suitable for applications that require disk writes such as a proxy server.
The SSD versions of Sense are fitted with a solid state drive and do support disk writes.

Details

Before you continue...

The Applianceshop would like to make you aware of our Firewall of Choice OPNsense. We believe this solution is the best choice for new network setups. Of course if you already have pfSense® based appliances in your network the PF Firewall may be best suited, although we do offer migration support as part of our service offerings.

Truly turn-key solution

The PF Firewall Solution is a customized distribution of FreeBSD tailored for use as a firewall and router based upon an unmodified version of pfSense® CE. In addition to being a powerful, flexible firewalling and routing platform, it includes a long list of related features and a package system allowing further expandability.

pfSense® is a registered trademark of Electric Sheep Fencing LLC.

Versions
Currently all PF Firewall appliances are installed with  2.3.4 Release.
Other versions can be offered upon request.

Features
PF Firewall includes most of the features available in expensive commercial firewalls, and more in many cases.
Below is a list of features of the currently installed release. All of these things are possible in the web interface, without touching anything at the command line.

  • Stateful inspection firewall
  • Granular control over state table
  • Network Address Translation (NAT)
  • Traffic Shaper
  • Captive portal
  • 802.1Q VLAN support
  • Virtual Private Network
  • Dynamic Domain Name System
  • High Availability
  • Load Balancing
  • DHCP Server and Relay
  • Reporting & Monitoring
  • Package Manager

  • For information about pfSense® CE see www.pfsense.org

Screenshot(s)

 
All packed into our...

High quality enclosure, build with the best materials available.

19" 1U rack mountable, OPN line enclosure

Our 19" rack enclosure is a durable 1U powder coated rack mountable enclosure, especially designed and build for our OPN line of open source appliances.

  1. Powder coated metal.
  2. Clean laser engraved front panel
  3. High quality finish
  1. Standard 3pin C14 power socket
  2. Good heat dissipation
  3. Quiet high performance appliances

Additional Information

Name PF Firewall A10 Dual Core rack Gen2
SKU PFS2600
Weight [Kg] 4.2500
Country of Origin The Netherlands
HS-Code 8517.6200
Enclosure Rack mountable
Dimensions [W x H x D] 485 x 44 x 335mm
Firmware based upon pfSense® CE
CPU AMD G-SERIES SOC GX-210UA 1.0Ghz Dual Core
Memory 2GB
Storage 16Gb Secure Digital
Ethernet ports 3 x GbE [Intel® I210-AT]
Remote Management port No
Total Firewall Throughput No
Maximum packets per second No
Maximum Port to Port Throughput No
Maximum VPN Throughput No
Maximum Statetable 3.000.000
Maximum Concurrent Sessions 1.500.000
Maximum VLANS 4093 [above 50: GUI restrictions may apply]
Power Supply Integrated with standard 3-pin C14 socket, AC 100~240V@50Hz~60Hz
Regulatory Compliance FCC part 15 Class A, CE, Rohs
Storage & Operating conditions Operating: 0 to +45°C / 10 to 90% r. H. non cond., Storage: -20 to +70°C / 10 to 90% r. H. non cond.
Package Content 19" rack appliance, Matching powercord, Configuration cable, Quickstart guide